Bearing Bracket, Removing And Installing: Removing
-- Remove the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .
There is a risk of damaging the threads.
- The control valve has left-hand threads.
-- Remove the left and right control valves using the Assembly Tool -1- in the direction of -arrow-.
Depending on the version of the control valve use one of the listed tools:
- Central Valve Assembly Tool:T10352
- Central Valve Assembly Tool:T10352/1
- Assembly Tool :T10352/2
- Assembly Tool:T10352/3
- Assembly Tool:T10352/4
-- To do so counterhold on the vibration damper with the :T40263 , :T40314 and the 24 mm socket.
-- Remove the bolts -1 through 6-.
Risk of damaging the bearing bracket.
- Carefully remove the bearing bracket without tilting it.
-- Remove the bearing mount.
-- Remove the plug -arrow-.
-- Remove the bolts -arrows-.
-- Install the :T40243 on the cylinder head -lower arrows-.
A second technician is required for the following steps.
-- Press the chain tensioner circlip -1- together and hold it.
-- Slowly press and hold the :T40243 in the direction of -arrow-.
- This will push back the chain tensioner.
The chain tensioner is lubricated with oil and can only be pushed back slowly by applying constant pressure.
-- Lock the chain tensioner with the :T40267 .
-- Remove the :T40243 .