Tightening Specifications

WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Front Final Cover Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace any bolts that were tightened with an additional turn.

-- Tighten the bolts in three steps in the sequence shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 10-	3 Nm
2.	-1 to 10-	20 Nm
3.	-1 to 10-	90° additional turn