Hydraulic Control Unit
WARNING: This page is about a different car, the 2014 Audi A5, 2013 Audi A5, 2012 Audi A5, and 2011 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
- Installed location: The hydraulic control unit is attached to the back of the transmission. The Transmission Control Module -J217- is attached directly to the hydraulic control module.
A - Solenoid Valve 1 -N88- connector
B - Automatic Transmission Pressure Regulating Valve 2 -N216- connector
C - Automatic Transmission Pressure Regulating Valve 1 -N215- connector
Removing and installing. Refer to TRANSMISSION CONTROL .
NOTE:
The OBD Monitors The Valves.