LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A4 Premium >> Repair and Diagnosis >> External Pages >> Different car >> Section 1234 (Rear Suspension (1 Of 2) (Coupe)) >> 42 Rear Suspension >> Suspension Strut/Shock Absorber, Spring >> Spring, Removing And Installing >> Notes

Spring, Removing And Installing: Notes

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required 

WARNING:
  • Before removing and installing the coil spring the :VAS6274  with the :VAS6274/10  must be retrofitted.
  • Retrofit the :VAS6274  with the :VAS6274/10  . Refer To Spring Tensioning System .
NOTE:

The Rest Of The Tools From The :VAS6274/10  Are Needed Later In The Procedure.

Fig 1: Identifying Tools From VAS 6274/10
GWWA42-10204Courtesy of AUDI OF AMERICA, LLC
  1. :VAS6274/10-1 
  2. :VAS6274/10-2 
  3. Locking Device Bolts
  4. :VAS6274/10-4 
  5. Sleeve