Two Different Chain Tensioners May Be Installed Depending on the Version:

Version 1: 

• Install the -T40243- -arrows-.
• Lift up the locking wedge for the chain tensioner by inserting a scriber or a suitable screwdriver into the chain tensioner opening in direction of -arrow 1-. Slowly press and hold the - T40243- in direction of -arrow 2-.

TIP: 

The chain tensioner is lubricated with oil and can only be pushed back slowly by applying constant pressure.

• Secure the chain tensioner using the -T40011-.

  Courtesy of

Version 2: 

• Install the -T40243- -arrows-.
• Press the chain tensioner circlip -1- together and hold it.
• Slowly press and hold the -T40243- in direction of -arrow-. This will push back the chain tensioner.

Courtesy of

TIP: 

The chain tensioner is lubricated with oil and can only be pushed back slowly by applying constant pressure.

• Secure the chain tensioner with the -T40267-.

All Versions: 

• Remove the -T40243-.

  Courtesy of