LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A4 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Controls, Housing [Servicing - 7-Speed Dual Clutch Transmission 0CJ, 0CL, 0CK, 0DN, 0DP]) >> 34 Controls, Housing >> Transmission, Disassembling And Assembling >> Overview - Transmission >> Overview - Transmission, AWD Vehicles >> Wheel Set Tightening Sequence (Transmission)

Wheel Set Tightening Sequence (Transmission)

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Wheel Set Tightening Sequence (Transmission)
GWWA34-11547Courtesy of AUDI OF AMERICA, LLC

-- Push the centering bracket -A- all the way in.

NOTE:

Bolt -6- without centering bracket.

-- Tighten the bolts in two steps in the sequence shown:

Step Bolts Tightening Specification
1. -1 to 6- Install by hand evenly until the bolt head contact the transmission housing.
2. -1 to 6- Tighten one after the other to 15 Nm + 90°
scientia non olet · About LEMON Manuals