Transmission Fluid Pan, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2020 Audi A4 allroad, 2020 Audi A4 Quattro, 2020 Audi A4, 2019 Audi A5 Quattro, and 2019 Audi A4 allroad. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
NOTE:
- Replace the seal and the ATF line.
- For vehicles with an aluminum transmission fluid pan, a plastic transmission fluid pan is available as a replacement part.
During the conversion both the centering pins -arrows- must be removed from the transmission housing.
- At the same time pay attention that the sealing surface is not damaged.
- Fill the ATF. Refer to ATF, DRAINING AND FILLING [7-SPEED DUAL CLUTCH TRANSMISSION] / TRANSMISSION FLUID, DRAINING AND FILLING [7-SPEED DUAL CLUTCH TRANSMISSION] / ATF LEVEL, CHECKING [7-SPEED DUAL CLUTCH TRANSMISSION] .
Install the ATF cooler. Refer to ATF COOLER, REMOVING AND INSTALLING .