Bearing Bracket, Removing and Installing: Installing

• Install the bolts -arrows- and tighten them. Tightening specifications: 8 Nm + 90° additional turn.

  Courtesy of

• Lubricate the hole -arrow- with engine oil.
  • Carefully mount the bearing bracket without tilting it.
• Attach the bearing mount and install the bolts -arrows- all the way by hand.
• Depending on the version, remove either the -T40011- or the -T40267-.
• Tighten the bearing bracket bolts -arrows-. Refer to Overview - Camshaft Timing Chains .

Installation is performed in reverse order of removal, noting the following:

• Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .
• There may be additional procedures depending on the model. Refer to Bearing Bracket, Removing and Installing .