Headrest Cover And Cushion, Removing And Installing: Installing

Fig 1: Identifying Headrest Cover

Courtesy of AUDI OF AMERICA, LLC

-- Install cover -1-.

-- Position the cover and slide it over the support with padding -2-.

-- Pull the left and right corners of the cover -arrow- over the support with the padding -2-.

Fig 2: Locating Headrest Cover Corner

Courtesy of AUDI OF AMERICA, LLC

-- Pull the cover so it is smooth.

-- Engage the locking channel -1-.

-- Bend the leg spring -2- up while sliding the trim -1- on.

Fig 3: Locating Leg Spring

Courtesy of AUDI OF AMERICA, LLC

-- Hold the leg spring -2- open until the trim -1- slides over the notches into the locked position.

-- Press the trim on firmly until it engages.

-- Align the cover -3- and pull it so it is smooth.

-- Make sure the cover lies on the padding without any wrinkles and without seam markings.

Install in reverse order of removal.