Clean Working Conditions

Always clean connection places and surrounding areas with engine or brake cleaner before loosening and dry cleaned places.
Clean the transmission and transmission components using Cleaning Solution -D 009 401 04-.
Use lint-free cloths when cleaning, for example, the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.
Seal all open lines and connections immediately with clean plugs or caps from the Engine Bung Set: VAS6122 .
Place removed parts on a clean surface and cover them. Use foil and paper. Use a lint-free cloth!
Carefully cover or plug unpacked components if repairs cannot be performed immediately.
Only install clean components: Install replacement parts immediately after removing them from their packaging.
Protect the disconnected connectors from dirt and moisture and only connect when they are dry.