Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Spark Plug Removal Tool:3122B
- Puller - Valve Seal:3364
- Seal Installer - Valve Stem:3365 for valve stem seal with a simple sealing lip. Refer to Figure.
- Seal Installer - Valve Stem:T40376/1 , for valve stem seal with a double sealing lip. Refer to the appropriate service information. (Figure).
- Valve Keeper Tool Kit:VAS5161A
- Valve Cotter Tool Kit - Punch:VAS5161/3A
- Guide Forks M6/M8 with Threaded Studs:VAS5161/5
- Retainer:VAS5161/6
- Valve Cotter Tool Kit - Assembly Cartridge:VAS5161/8A
- Knurled Thumb Screws M6:VAS5161/12
- Valve Cotter Tool Kit - Valve Insertion Device:VAS5161/18
- Valve Cotter Tool Kit - Guide Plate 19c:VAS5161/19C
- Valve Cotter Tool Kit - Adapter:T40012
- Mounting Sleeve. Refer to the parts information