LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (CYLINDER HEAD, VALVETRAIN (4-Cylinder 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Balance Shaft Drive Chain >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

-- Tighten The Bolt -1- In Steps:

Step Tightening Specification/Additional Turn
1. 10 Nm
2. -- Turn the intermediate sprocket
  • The intermediate sprocket must not have any play otherwise loosen and tighten it again.
3. 25 Nm
4. 90° additional turn
scientia non olet · About LEMON Manuals