Vibration Damper, Removing And Installing: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools and workshop equipment required

Counterhold - Vibration Damper:T10355
Wrench - 21mm:T40263
Adapter:T40314
Vibration Damper Assembly Tool:T10531

Individual Components of the Vibration Damper Assembly Tool:T10531 :

Vibration Damper Assembly Tool - Counterhold Tool:T10531/1
Vibration Damper Assembly Tool - Tensioning Pins:T10531/2
Vibration Damper Assembly Tool - Turning Over Tool:T10531/3
Vibration Damper Assembly Tool - Knurled Nut:T10531/4

The vibration damper bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3- with each other. Before removing the bolt the chain sprocket must be secured to the crankshaft as described as follows.

Courtesy of AUDI OF AMERICA, LLC