After-Run Coolant Pump -V51-, REMOVING AND INSTALLING - LAYING UNDERNEATH: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal, noting the following:
NOTE:
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts information.
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Check the coolant level. Refer to COOLANT, DRAINING AND FILLING .
- Refer to OVERVIEW - ELECTRIC COOLANT PUMP
- Refer to OVERVIEW - CHARGE AIR SYSTEM
- Refer to CHARGE AIR SYSTEM .
- Refer to NOISE INSULATION .