LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (COOLING SYSTEM (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 19 Cooling System >> Coolant Pump/Coolant Thermostat >> Coolant Pump, Removing And Installing >> Installing

Coolant Pump, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Additional procedures:

NOTE:

Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts information.

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Connect the coolant connection with coupling. Refer to CONNECT THE COOLANT HOSE TO THE CONNECTOR COUPLING .

NOTE:

Used coolant cannot be used again.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals