LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (COOLING SYSTEM (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Coolant Pipe On Fan Shroud, Removing And Installing >> Removing

Coolant Pipe On Fan Shroud, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
NOTE:

Place a cloth underneath to catch any leaking coolant.

-- Loosen the hose clamps -1 and 2-, then clamp off the coolant hose with the :3094  and remove.

GWWA19-11951Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the coolant pipe.

scientia non olet · About LEMON Manuals