Engine, Removing: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Pry Lever:80-200
- Commercially Available Step Ladder or :VAS5085
- Engine Bung Set:VAS6122
- Coolant Collection System:VAS5014 or Shop Crane - Drip Tray:VAS6208
- Hose Clip Pliers:VAS6362
- Engine and Gearbox Jack:VAS6931
- Engine Sling - Engine Bracket:2024A/1 for the Engine Sling:2024A
- Securing element from the Transmission Support:3282
- Engine/Gearbox Jack - Engine Support:T10359A
- Protective Eyewear
- Safety Gloves
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Screw type clamp
- Bolts - Engine mount
- Bolts - Transmission mount