LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 114 (Turbocharger, Supercharger 2.0L (CNSB, CNTC, CYFB, DJJA)) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler, Removing And Installing >> Removing

Charge Air Cooler, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .

-- Loosen the clamps -1 and 2- and remove the air duct hose.

Fig 1: Identifying Clamps
GWWA21-10489Courtesy of AUDI OF AMERICA, LLC

-- Seal the open lines and connections with clean plugs from the : VAS6122  .

-- Unlock the retaining tab and remove the cover -1- toward the front.

GWWA19-11552Courtesy of AUDI OF AMERICA, LLC

-- Unclip the left and right air duct -2- downward in direction of -arrow B-.

GWWA19-11554Courtesy of AUDI OF AMERICA, LLC

-- Open the left and right retainers in direction of -arrow A- and disengage the condenser -3- from the charge air cooler -1-.

-- Secure the condenser to the lock carrier.

-- Remove the charge air cooler.