Turbocharger, Removing And Installing: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Engine Bung Set:VAS6122
- Hose Clip Pliers:VAS6362
CAUTION:
If mechanical damage (for example a destroyed compression wheel) is found on the turbocharger, just replacing the turbocharger is not enough. To avoid subsequent damage later, perform the following steps:
- Check the air filter housing, air filter element and air duct hoses for contamination.
- Check the entire charge air circuit and charge air cooler for foreign objects.
- If there are foreign objects in the charge air system, clean the charge air circuit and replace the charge air cooler if necessary.