Fender Brace, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2017 Audi A3, and 2016 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Remove the headlamps. Refer to HEADLAMPS .
-- For vehicles with a TDI engine, loosen and set aside the fuel filter. Refer to FUEL FILTER For engine(s) CRUA] .
-- Free up the wiring harness -4- from the fender brace -5-.
-- Slightly lift the wiring channel -3- in the direction of -arrow- and loosen the bolt -1-.
-- Remove the bolts -2 and 6-.
-- Remove the bolt -1- from below turning to the right using an E5 external TORX® .
-- Remove the fender brace -2-.