Overview - Glove Compartment
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Glove Compartment Lid
- Removing and Installing. Refer to GLOVE COMPARTMENT LID, REMOVING AND INSTALLING .
- Glove Compartment Handle
- Removing and Installing. Refer to GLOVE COMPARTMENT HANDLE, REMOVING AND INSTALLING .
- Lock Cylinder, Removing and Installing. Refer to GLOVE COMPARTMENT HANDLE LOCK CYLINDER, REMOVING AND INSTALLING .
- Press into the glove compartment cover until it engages audibly
- Glove Compartment Lamp -W6-
- Component Location Overview. Refer to OVERVIEW - INSTRUMENT PANEL LAMPS .
- Pollen Filter Cover
- Press on until it engages audibly
- Front Passenger Airbag Deactivation Key Switch -E224-
- Not for North American market.
- Information Electronics Control Module 1 -J794-
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Overview. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
- Bolt
- Quantity: 6
- Tightening specification and sequence. Refer to Fig 2.
- Glove Compartment
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification and sequence. Refer to Fig 2.
- Glove Compartment Lid Damping Element
- With Glove Compartment Lamp Switch -E26-
- Removing and Installing. Refer to GLOVE COMPARTMENT LID DAMPING ELEMENT, REMOVING AND INSTALLING .
- Damping Element Hinge Pin
- Right Footwell Lamp -W10-
- Component Location Overview. Refer to OVERVIEW - INSTRUMENT PANEL LAMPS .
- Bolt
- Quantity: 2
- Tightening specification and sequence. Refer to Fig 2.
- Glove Compartment Lid Hinge Pin
- Quantity: 2
Glove Compartment - Tightening Specification and Sequence
-- Tighten the bolts to 3 Nm in the sequence -arrows 1 to 8-.