Glove Compartment Lid, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the damping element for the glove compartment lid. Refer to GLOVE COMPARTMENT LID DAMPING ELEMENT, REMOVING AND INSTALLING .
-- Place the glove compartment on a soft surface.
-- Remove the liner -2- from the glove compartment.
-- Use a punch to drive the left and right hinge pin -1- out through the hole -arrow A- in the glove compartment in the -direction of the arrow B-.
-- Remove the glove compartment lid from the glove compartment.