Glove Compartment Handle, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Press the glove compartment handle -1- and release the side hook on the glove compartment handle using a screwdriver -arrow-.
NOTE:
Make sure that the glove compartment handle does not re-engage. Repeat the procedure if necessary.
-- Insert the Locking Pin (3 pc.): T40011 through an opening on the side of the glove compartment lid to release the hook for the glove compartment handle -arrow A-.
-- At the same time, pry the glove compartment handle out of the glove compartment lid -arrow B- using the semi-round medium hard scraper and remove it.