Glove Compartment Handle Lock Cylinder, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert the key -4- into the new lock cylinder -3-.
-- Remove the protective cap from the new lock cylinder.
-- Insert the lock cylinder with the seal -2- into the glove compartment handle -1- until it engages. Pay attention to the installation position of the pin.
- The pin -arrow- on the lock cylinder points to the left.
Further installation is performed in reverse order of the removal.