Driver Side Instrument Panel Cover, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the driver side instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
-- Versions with footwell lamp, remove the footwell lamp. Refer to OVERVIEW - INSTRUMENT PANEL LAMPS .
-- Remove the side bolt -1-.
-- Remove the lower bolts -3- and -4-.
-- Unclip the driver side instrument panel cover -2- from the instrument panel using the Wedge Set - Wedge 1 : T10383/1 -arrows-.
-- Disconnect the connector from the light switch.
Vehicles with Ambient Lighting:
-- Unclip the clip -1- for the connector for the ambient lighting bulb.
-- Disconnect the connector -2- for the ambient lighting bulb.