Overview - Sun Visors
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Sun Visor
- Allocation. Refer to the Electronic Parts Information (ETKA).
- Removing and Installing. Refer to SUN VISOR, REMOVING AND INSTALLING .
- Remove the clip remaining in the mounting point and insert in the sun visor mount to install.
- Engage in the sun visor mount in the opening in the body
- Expanding Cap
- Clipped into the sun visor
- Press until it engages completely
- Roof Grab Handle
- Quantity: 4
- Removing and Installing. Refer to ROOF GRAB HANDLE, REMOVING AND INSTALLING .
- Press until it engages completely
- Expanding CapsCAUTION:
Only up to their lock position (do not pull them out all the way otherwise the silicone brake and spring and fall out and then the handle has to be replaced).
- Press until it engages completely
- Sun Visor Center Bearing
- Removing and Installing. Refer to SUN VISOR CENTER SUPPORT, REMOVING AND INSTALLING .
- Do not damage spreader clips when inserting
- Expanding Cap
- Clipped into the sun visor center support