Center Console Bracket, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .

Center console font bracket:

Courtesy of AUDI OF AMERICA, LLC

-- Push aside the carpet in the area of the threaded connection and remove the nut -1-.

-- Remove the center console bracket -2-.

Rear center console bracket:

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 and 2-.

-- Remove the bracket -3- from the center console.

Center console securing bracket:

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the wiring harness -1 and 3- from the securing bracket.

-- Disconnect and free up the connectors.

-- Remove the nuts -2 and 5- and remove the securing bracket -4-.