SCR System Safety Precautions: Notes
WARNING: This page is about a different car, the 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Note the following when working on the Selective Catalytic Reduction (SCR)-System:
WARNING:
The reducing agent can cause skin irritation.
- Avoid contact with skin and eyes! Wear protective gloves!
- If reducing agent should get on your skin, wash it off immediately with soap and water.
- If reducing agent gets in your eye, rinse the eye for several minutes with water.
- Never inhale or swallow the reducing agent!
- Should you swallow any reducing agent, rinse your mouth, drink plenty of water and contact a doctor immediately.
Note the following when removing or installing any components of the SCR-System:
- The reducing agent tank must be empty when working on the SCR-System. Be sure to read the work procedure whenever the reducing agent in the tank must be emptied. Empty the tank, if necessary. Procedure, refer to SELECTIVE CATALYTIC REDUCTION SYSTEM .
Note the following when removing or installing the tank:
- The reducing agent tank must be empty. Empty the tank if necessary: Procedure. Refer to SELECTIVE CATALYTIC REDUCTION SYSTEM .