Engine, Removing: Notes
Special tools and workshop equipment required
- Pry Lever:80-200
- Engine and Gearbox Jack:VAS6931
- Step Ladder:VAS5085
- Engine Bung Set:VAS6122
- Shop Crane - Drip Tray:VAS6208
- Hose Clip Pliers:VAS6362
- Locking Pin:T10060A
- Engine Support:T10497 with Pin:T10497/1
- Protective eyewear
- Protective gloves
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Engine mount
- Screw type clamp - Front exhaust pipe
- Gasket - Front exhaust pipe
- Bolts - Driveshaft to bevel box
- Bolts - Subframe mount
- Bolts - Transmission mount
- Bolts - Bevel box mount
- Bolts - Engine to transmission