Engine And Transmission, Separating [XXXX]: Procedure

Courtesy of AUDI OF AMERICA, LLC

• Engine/transmission assembly removed and mounted on :T10497  .

-- Removing starter. Refer to STARTER .

-- Remove bolts -arrows- and remove the transmission support.

Courtesy of AUDI OF AMERICA, LLC

-- Install :T40013  on the transmission and close locking device.

Courtesy of AUDI OF AMERICA, LLC

-- Engage the :VAS6100  with :10-222A/2  on the transmission lift hook.

-- Remove the bolts -1, 2, 5, 6, 7 and 8- connecting the transmission to the engine.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the transmission from the engine, pay attention to the intermediate plate while doing so.