Engine Mount, Removing And Installing: Notes
Special tools and workshop equipment required
- Engine Support Bridge:10-222A
- Engine/Gearbox Support Shackle (2 pc.):10-222A/12
- Engine Support:10-222A/31A
- :T40091/1 from the Engine Support - Basic Set:T40091
- :T40093/3-5 from the Engine Support Supplement Kit:T40093A
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Engine mount
Tool Development
-- If the adapter for the :10-222A/4 does not have the indicated holes -arrow- shown they must be added.
- Dimension -a- = 225 mm.
- Hole diameter = 12.5 mm