LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> CRANKSHAFT, CYLINDER BLOCK (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt, Removing And Installing >> Removing

Ribbed Belt, Removing And Installing: Removing

-- Remove the noise insulation -1-. Refer to NOISE INSULATION .

GWWA10-11564Courtesy of AUDI OF AMERICA, LLC
CAUTION:

- Mark the running direction before removal.

- Pay attention to the running direction when reinstalling.

-- Pivot the tensioner counter clockwise with a wrench in direction of -arrow- to release the tension on the ribbed belt.

GWWA13-10949Courtesy of AUDI OF AMERICA, LLC

-- Secure the tensioning system using the :T10060A  .

-- Remove the ribbed belt.

scientia non olet · About LEMON Manuals