SCR Adaptation Values, Resetting
Special Tools And Workshop Equipment Required
- Vehicle Diagnostic Tester
The adaptation value in the engine control module must be adapted using the Vehicle Diagnostic Tester when the reducing agent is drained or one of the following components is replaced.
- Reducing Agent Tank
- Reducing Agent Pump
- Reducing Agent Injector
- Reducing Agent Line
- Engine Control Module
-- Connect the Vehicle Diagnostic Tester.
-- Select Diagnostic operating mode and Start diagnostics .
-- Select the Select individual test tab and select the following tree structure consecutively:
- Drivetrain
- Select The Engine Code And Engine
- 01- OBD-Capable Systems .
- 01 - Engine Electronics
- 01 - Engine Electronics, Functions
- 01 - Reseting Reducing Agent System Adaptation Values