Exhaust Gas Temperature Sensor 3 -G495- /Exhaust Gas Temperature Sensor 4 -G648-, Removing And Installing: Removing

• Follow the safety precautions when working on the exhaust system. Refer to SAFETY PRECAUTIONS WHEN WORKING ON EXHAUST SYSTEM .

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connectors and free up the wires.

Courtesy of AUDI OF AMERICA, LLC

2  - For Exhaust Gas Temperature Sensor 4 -G648-

3  - For Exhaust Gas Temperature Sensor 3 -G495-

• Do not cut the wire connection.

-- Remove the corresponding exhaust gas temperature sensor with a tool from the :T10395A  .

Courtesy of AUDI OF AMERICA, LLC

1. For Exhaust Gas Temperature Sensor 4 -G648-
2. For Exhaust Gas Temperature Sensor 3 -G495-

• Depending on the engine installed, there are different installed positions.

  Courtesy of AUDI OF AMERICA, LLC