Exhaust Gas Temperature Sensor 1 -G235-, REMOVING AND INSTALLING: Installing

Install In Reverse Order Of Removal. Note The Following: 

• Protect the exhaust gas temperature sensor against knocks and impacts. A dropped exhaust gas temperature sensor may not be used again.

-- Coat the thread with hot bolt paste. Refer to the Parts information.

Installed location of the Exhaust Gas Temperature Sensor 1 -G235- :

Courtesy of AUDI OF AMERICA, LLC

• The angled shaft -1- must point downward vertically.

-- During installation, all cable ties must be installed at the same location.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .