LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Engine Mechanical >> Exhaust >> EXHAUST SYSTEM (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN) >> 26 Exhaust System >> Exhaust Pipes/Mufflers >> Front Exhaust Pipe, Removing And Installing >> Removing

Front Exhaust Pipe, Removing And Installing: Removing

-- If equipped, remove the rear noise insulation -1-. Refer to NOISE INSULATION, REMOVING AND INSTALLING / OVERVIEW - NOISE INSULATION .

GWWA66-11001Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-. (not installed on the engine codes CRFA and CRFC.)

GWWA26-11262Courtesy of AUDI OF AMERICA, LLC

-- Loosen clamping sleeve -2- and push it rearward.

-- AWD Vehicles: Remove the front tunnel brace. Refer to OVERVIEW - UNDERBODY TRIM PANELS / UNDERBODY TRIM PANELS, REMOVING AND INSTALLING .

-- Remove the bolts -1-.

GWWA26-11261Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -2- and the clamp.

-- Remove the front exhaust pipe.