Front Exhaust Pipe, Removing And Installing: Installing

Install In Reverse Order Of Removal. Note The Following: 

• Replace the seal and screw-type clamp after removal.

-- Pay attention to the installation position:

• Refer to INSTALLED LOCATION OF THE FRONT EXHAUST PIPE SCREW CLAMP .
• Refer to INSTALLED LOCATION OF THE SEAL BETWEEN THE EMISSIONS CONTROL MODULE AND FRONT EXHAUST PIPE. .
• Refer to INSTALLED POSITION OF FRONT CLAMPING SLEEVE .

-- Install the exhaust system free of tension. Refer to EXHAUST SYSTEM, INSTALLING AND ALIGNING .