Coolant, Extracting

Courtesy of AUDI OF AMERICA, LLC

TIP: 

• To extract the coolant use the extraction adapter  ) COOLING SYSTEM, FLUSHING - Extraction Adapter

-- Remove the suction hose -5- from the reservoir -2-.

-- Attach the extraction adapter -12- on the connector coupling from the suction hose -5-.

-- Switch on the pump -7- and open the shut-off valves -A- and -B- on the valve block -8-.

-- Extract the excess coolant using the extraction adapter -12-.

-- Connect the shut-off valves on the valve block and switch off the pump.