LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> COOLING SYSTEM (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Front Coolant Pipe, Removing And Installing >> Removing

Right Front Coolant Pipe, Removing And Installing: Removing

GWWA10-1637Courtesy of AUDI OF AMERICA, LLC

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING WITHOUT COOLING SYSTEM CHARGE KIT - ELECTRIC VACUUM PUMP .

-- Remove the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

-- Remove the Air Conditioning (A/C) compressor, with the refrigerant hoses still connected from the bracket. Refer to A/C COMPRESSOR, REMOVING AND INSTALLING ON BRACKET / A/C COMPRESSOR, REMOVING AND INSTALLING and tie up to the right side.

-- Loosen the clamps -1, 4 and 6- and remove the coolant hoses.

GWWA19-11283Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -5- and the bolt -2-.

-- Free up the coolant hoses -3-, and remove the front right coolant pipe.