LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> COOLING SYSTEM (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Lower Front Coolant Line, Removing And Installing >> Installing

Lower Front Coolant Line, Removing And Installing: Installing

Install In Reverse Order Of Removal. Note The Following: 

-- Clean and smooth out the seals and O-ring sealing surfaces.

-- Coat the seals and O-rings with coolant.

-- Install the oil filter housing. Refer to OIL FILTER HOUSING, REMOVING AND INSTALLING .

-- Connect the coolant hose to the coupling. Refer to CONNECT THE COOLANT HOSE TO THE COUPLING .

CAUTION:

- Fill the coolant system using only the Vehicle Diagnostic Tester.

-- Fill and bleed the coolant circuit. Refer to COOLANT, DRAINING AND FILLING WITHOUT COOLING SYSTEM CHARGE KIT - ELECTRIC VACUUM PUMP:VAS6096/2 .

scientia non olet · About LEMON Manuals