Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

Depending on the vehicle, there are different components.

Fig 1: Charge Air Pressure Sensor And Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

-- Spray the hose on the Charge Air Pressure Sensor - G31- with solvent before disconnecting.

CAUTION:

There is a risk of damaging the charge air pressure sensor by breaking the connection.

- Remove the hose carefully and evenly from the connection.

-- Remove the bolts -2- and the Charge Air Pressure Sensor -G31-.