LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> TURBOCHARGER, SUPERCHARGER (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING >> Removing

Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing

Depending on the vehicle, there are different components.

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

GWWA21-10784Courtesy of AUDI OF AMERICA, LLC

-- Spray the hose on the Charge Air Pressure Sensor -G31- with thinner before removing.

CAUTION:

- Remove the hose carefully and evenly from the connection.

-- Remove the bolts -2-, and remove the Charge Air Pressure Sensor -G31-.

scientia non olet · About LEMON Manuals