Vehicle Electrical System Control Module Bracket, Removing And Installing: Removing
-- Remove the instrument cluster. Refer to INSTRUMENT CLUSTER WITH Instrument Cluster Control Module -J285-, REMOVING AND INSTALLING .
-- Cut the cable tie -arrow-.
-- Disengage fuse panel C and press aside. Refer to Fuse Panel C -SC- UNDER LEFT INSTRUMENT PANEL, REMOVING AND INSTALLING .
-- Remove the Front Parking Aid Warning Buzzer -H22-. Refer to Front Parking Aid Warning Buzzer -H22-, REMOVING AND INSTALLING .
-- Remove the Vehicle Electrical System Control Module -J519-. Refer to Vehicle Electrical System Control Module -J519-, REMOVING AND INSTALLING .
-- Remove the bolts -2, 3 and 6-.
-- Push the bracket -1- far enough forward from the instrument panel crossmember until the alignment pins -4 and 5- are disengaged.
-- Cut the cable ties -arrows-.
-- Free up the wiring harness on the mount.
-- If equipped free up the auxiliary fuse panel.
-- Remove the bracket to the vehicle interior.