LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood, Lids -- (A3 Sedan) >> 55 Hood, Lids >> Rear Lid >> Stop And Adjusting Buffer, Removing And Installing >> Stop And Adjusting Buffer, Removing And Installing, Sedan >> Side Stops, Removing And Installing:

Side Stops, Removing And Installing:

GWWA55-11027Courtesy of AUDI OF AMERICA, LLC
  1. Side Panel
  2. Rear Lid
  3. Stop, Lid Side
    • Removing

      -- Pull the expanding clip from the stop.

      -- Unclip the stop from the rear lid.

    • Installing

      -- Push the stop in the rear trim until it engages.

      -- Push the expanding clip flush to stop.

  4. Expanding Clip
  5. Upper stop
  6. Stop, Body Side
    • Removing

      -- Pull the expanding clip from the stop.

      -- Unclip the stop from the side panel.

    • Installing

      -- Push the stop until it engages in the side panel.

      -- Push the expanding clip flush to stop.

scientia non olet · About LEMON Manuals