Hinges, Removing And Installing, Sedan: Notes

Courtesy of AUDI OF AMERICA, LLC

Hinge
NOTE:
Before removing the mark the position on the body and the rear lid.
- Removing
  -- Remove the luggage compartment side trim.
  
  -- Remove the nuts on the lid side. Refer to SIDE, LENGTH AND HEIGHT ADJUSTMENT AT HINGE .
  
  -- Remove the bolts -3-.
- Installing
  -- When installing first fasten the hinge with the bolts -3-.
  
  -- Lightly tighten the nuts on the lid side.
  
  -- Close the lid, adjust to the rear lid cut-out and tighten the nuts -Item 2- OVERVIEW - REAR LID, SEDAN - List Item:Nut.
Buffer
- Pushed in the hinge as shown.
Bolt
- Tightening specification -Item 4- OVERVIEW - REAR LID, SEDAN- List Item:Bolt