Overview - Backrest Release And Entry Assistance
NOTE:
The illustration shows the backrest release and entry assistance for standard/sport seats.
- Slider
- Removing and Installing. Refer to GLIDING PIECE, REMOVING AND INSTALLING .
- Entry Assistance Release Cable
- from the backrest hinge to the seat rail release
- Removing and Installing. Refer to ENTRY ASSISTANCE RELEASE CABLE B, REMOVING AND INSTALLING , and ENTRY ASSISTANCE RELEASE CABLE A, REMOVING AND INSTALLING
- Engage the cable eyelet and engage audibly by pulling on the cable.
- Adjusting. Refer to ENTRY ASSISTANCE RELEASE CABLE A, ADJUSTING .
- Release Cable Adjuster
- Quantity: 2
- For cable backrest release.
- Connecting Cable
- For the backrest release
- Between the handle and bracket
- Engaged in the handle and bracket
- Removing and Installing. Refer to CONNECTING CABLE, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
- Bolt
- 3.5 Nm
- Backrest Release
- Removing and Installing. Refer to BACKREST RELEASE, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
- Bolt
- 3.5 Nm
- Backrest Release Trim
- Removing and Installing. Refer to BACKREST RELEASE TRIM, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT .
- Press on until it engages audibly
- Rivet
- Quantity: 2
- Bearing
- For the backrest release
- For the backrest release cable
- Riveted to backrest frame
- Removing and Installing. Refer to BACKREST RELEASE MOUNT, REMOVING AND INSTALLING .
- Release Cable
- Component of the release cable
- Press on until it engages audibly
- Rivet
- Quantity: 2
- Release Cable
- For the backrest release
- One piece
- Removing and Installing. Refer to BACKREST RELEASE CABLE, REMOVING AND INSTALLING .
- Adjusting. Refer to BACKREST RELEASE CABLE, ADJUSTING .
- Pin
- For the backrest release
- Both sides
- Component of the backrest hinge.