Headrest Guide, Removing And Installing: Removing
WARNING:
- Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the backrest cover with the backrest cushion. Refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
Right Headrest Guide:
-- Press retaining tabs in -arrows- and simultaneously pull the headrest guide -1- out of the backrest frame -2-.
NOTE:
Ignore -item 3-.
Left Headrest Guide:
-- Press in the retaining tab -arrows- and simultaneously pull headrest guide -1- out of the backrest frame -2-.