Entry Assistance Release Cable B, Removing And Installing: Removing
- Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the :VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Move the front seat into its highest position.
-- Remove the tunnel-side seat side trim. Refer to SEAT SIDE TRIM ON TUNNEL SIDE, REMOVING AND INSTALLING .
-- Turn the backrest adjustment hand wheel forward until stop.
-- Disengage the cable B bracket -2- for entry assistance from the support bracket on the seat pan.
-- Disengage the eyelet -1- of the entry assistance cable B from the pins on the seat forward/back adjustment.
-- Disengage the support bracket -1- of the entry assistance cable B from the backrest hinge, to do this release the catches -arrow-.
-- Disengage the eyelet -2- of the entry assistance cable B with a screwdriver from the backrest hinge pins and remove.