Driver Assistance Systems Front Camera, Removing And Installing: Installing
Install In The Reverse Order Of Removal. Note The Following:
NOTE:
The camera vision range on the inside of the windshield must not be fogged up or dirty.
The retaining clips must be replaced each time the front camera is removed.
-- Remove the retaining clip -2- in direction of -arrow- from the mount -1- and insert a new one.
-- Clean the lens on the windshield with Cleaning Solution:D 009 401 04 .
-- Calibrate The Driver Assistance Systems Front Camera. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA SYSTEM CALIBRATION .