Final Drive Identification, 0BD

The 0BD rear final drive unit is used with the following transmissions:

6-Speed Manual Transmission 0B2 AWD
6-Speed Manual Transmission 0B4 AWD
7-Speed S tronic Transmission 0B5 AWD
6-Speed Automatic Transmission 0B6 AWD
8-Speed Automatic Transmission 0BK AWD

Allocation Rear Final Drive

Refer to CODE, TRANSMISSION ALLOCATION, RATIOS AND CAPACITIES

Location on Rear Final Drive

Fig 1: Final Drive 0BD Code Letters And Manufacture Date

Courtesy of AUDI OF AMERICA, LLC

Final drive 0BD, code letters and manufacture date -arrow-

-Arrow A- Final Drive 0BD with Part Number (example: 0BD 500 043A)

Fig 2: Final Drive 0BD Including Part Number

Courtesy of AUDI OF AMERICA, LLC

-Arrow B- Code letters "JTN"

-Arrow C- Rear final drive date of manufacture

Example:	F	292	3242
	I	I	I
	Production year - 2006- F = 2006, G = 2007, H = 2008, etc.	Production date -292nd calendar day- (always given in three-digit format)	Day of manufacture serial number

Additional data can be ignored.

NOTE:

When installing a new rear final drive unit, the rear final drive code, the PR number and the vehicle engine code must be verified . This is the only to assure the correct allocation.